High tide boat lift manual

[Raine]

High tide boat lift manual
.
.
Download / Read Online High tide boat lift manual
.
.
.
How to level Hi-Tide boat lift

Hi-Tide boat lift maintenanceHi-Tide boat lift troubleshooting

Hi-Tide boat lift wiring diagram

High Tide boat lift limit switch

Hi-Tide boat lift Remote Control

hi-tide boat lift replacement parts

hi-tide remote not working

.
The installation of this lift is simplified by its lightweight design and simple We urge you to read this manual before attempting an installation.
filexlib. 1) Turn power on to lift. 2) Set switches in “DOWN” position and allow lift cradle to sink into water deep enough to clear boat.
The following page you will find the necessary information for the operation of your new lift, as well as instructions on its use. Your new Remote Control Panel
At Hi-Tide Sales, we take pride in bringing the most advanced, easy to use, minimum maintenance boat lift system to the market today. The Installation of this
It is recommended that you lubricate all the grease fittings on the bearings and pulleys every six months. In addition, the cable should be rinsed on a regular
In the following pages you will find the necessary information for the maintenance of your new lift, as well as instructions on its use. Your new YACHT LIFT is
DOCK. Must have a min. 60″ of piling above highest point of travel of the cradle beam.
Standard profile motor cover. Application of silicone cement to top of motor before installation will help retain cover in high winds.
Hi-Tide Boat Lift Manuals. Download installation and owners manuals as well as specifications and warranties for Hi-Tide products:
At Hi-Tide Sales, we take pride in bringing the most advanced, easy to use, minimum maintenance boat lift system to the market today. The Installation of this
How do you program a Hi Tide boat lift remote? LIGHT RECEIVER PROGRAMMING 1) PRESS AND HOLD “PROGRAM1” BUTTON ON LIGHT RECEIVER BOARD. 2) PRESS AND HOLD “LIGHT” BUTTON ON TRANSMITTER FOR 2 SECONDS. “CH1″ LED WILL FLASH RED AND THEN SOLID GREEN. 3) RELEASE “PROGRAM1” BUTTON.
How do you program a Hi Tide boat lift remote? LIGHT RECEIVER PROGRAMMING 1) PRESS AND HOLD “PROGRAM1” BUTTON ON LIGHT RECEIVER BOARD. 2) PRESS AND HOLD “LIGHT” BUTTON ON TRANSMITTER FOR 2 SECONDS. “CH1″ LED WILL FLASH RED AND THEN SOLID GREEN. 3) RELEASE “PROGRAM1” BUTTON.
Why is my boat lift not working? Several factors can contribute to boat lift motor problems, including faulty wiring in the motor, burnt fuses, an incorrect amount of voltage to the motor, and a defective up-button , among others. A marine technician can easily repair motor problems, but a completely damaged motor will require replacing.

.
High tide boat lift prirucnik
High tide boat lift manuele
High tide boat lift user guide
High tide boat lift prirucka
High tide boat lift kezikonyv

[投稿者]

投稿